Showing 61–72 of 569 results
CR-131N
Specification Finish Top, Bottom: Surface-treated steel plate, t1.2, off-white, mat finish paint Side panel: Surface-treated steel plate, t1.6, off-white, mat finish paint Rear panel: Surface-treated steel plate, t1.0, off-white, mat finish paint Dimensions 546 (W) × 674.5 (H) × 420 (D) mm (21.5″ × 26.56″ × 16.54″) Weight 20.3
CR-273
Specification Finish Chassis section: Surface treated steel plate Top plate/flame 2 mm thick Reinforcement 1.6 mm thick Base: Steel plate (2 mm thick), powder coating, black Design section: Pre-coated steel plate (1 mm thick), ivory, semi-gloss Dimensions 566 (W) × 1364 (H) × 435 (D) mm Weight 48 kg
CR-413
Specification Finish Chassis section: Surface treated steel plate Top plate/flame 2 mm thick Reinforcement 1.6 mm thick Base: Steel plate (2 mm thick), powder coating, black Design section: Pre-coated steel plate (1 mm thick), ivory, semi-gloss Dimensions 566 (W) × 2000 (H) × 435 (D) mm Weight 60 kg
CR-413-6
Specification Finish Chassis section: Surface treated steel plate Top plate/flame 2 mm thick Reinforcement 1.6 mm thick Base: Steel plate (2 mm thick), powder coating, black Design section: Pre-coated steel plate (1 mm thick), ivory, semi-gloss Dimensions 566 (W) × 2000 (H) × 615 (D) mm Weight 76 kg
D-2000AD1
*0 dB = 0.775 V Input 4 channels, Mic/Line selectable Mic: -50/-36 dB*, 2.6 kΩ, electronically-balanced Line: -10 dB*, 2.6 kΩ/+4 dB*, 7 kΩ, electronically-balanced Connector: XLR-3-31 equivalent Phantom power supply (48 V DC, can be used when set for the Mic) Ground lift switch A/D Converter 24 bit Sampling
D-2000CB
Network I/F CobraNet: 100BASE-TX, PRIMARY/SECONDARY 2 system, RJ45 connector, Enables decentralized installation, Audio transmission only Connection cable: Shielded twisted pair (STP) Cat 5 or higher LAN cable To be connected via the specified switching hub Note: This network should be completely independent of other LAN. Number of D-2008SP connection: Max.
D-2000DA1
* 0 dB = 0.775 V Output 4 channels, +4 dB*/-10 dB* (changeable), adaptable load of 600 Ω or more, balanced (electronically-balanced)/unbalanced (changeable), XLR-3-32 equivalent D/A Converter 24 bit Sampling Frequency 48 kHz Frequency Response 20 Hz – 20 kHz, ±1 dB Dynamic Range 104 dB (IHF-A weighted) or more