| Type | Condenser |
| Frequency Response | 20 to 20,000 Hz |
| Polar Pattern | Cardioid |
| Sensitivity (at 1,000 Hz) | Open Circuit Voltage: -45 dBV/Pascal (5.6 mV) (1 Pa = 94 dB SPL) |
| Impedance | Rated at 150 ohms (85 ohms actual) Recommended minimum load impedance: 800 ohms |
| Output Clipping Level | 800 ohm Load: -4 dBV (0.63 V) 150 ohm Load: -15 dBV (0.18 V) |
| Maximum SPL (at 1,000 Hz) | 800 ohm load: 136 dB (attenuator at 0) 146 dB (attenuator at -10) 150 ohm load: 128 dB (attenuator at 0) 138 dB (attenuator at -10) |
| Self-Noise | 16 dB typical, A-weighted 19 dB typical, weighted per DIN 45 405 |
| Hum Pickup | -3 dB equivalent SPL in a 1 mOe field (60 Hz) |
| Signal-to-Noise Ratio | 78 dB (IEC 651)* at 94 dB SPL S/N ratio is difference between 94 dB SPL and equivalent SPL of self– noise A-weighted |
| Overvoltage and Reverse Polarity Protection | Max. external voltage applied to pins 2 and 3 with respect to pin 1: +52 Vdc Reverse polarity protection: 200 mA max. (diode-clamped) |
| Polarity | Positive pressure on diaphragm produces positive voltage on pin 2 relative to pin 3 |
| Power | 11 to 52 vdc, 1.2 mA |
| Case | Steel construction with vinyl metallic paint finish and stainless steel screens |
| Connector | Three-pin professional audio connector (male XLR type) |
| Net Weight | 230 grams (8 oz) |
| Dimensions | 212 mm (7-9/16 in.) L x 23.5 mm (2 in.) W at the widest point |








