| Type | Condenser |
| Frequency Response | 50 to 20,000 Hz |
| Polar Pattern | Supercardioid |
| Sensitivity (at 1,000 Hz) | Open Circuit Voltage: –52.5 dBV/Pa (2.4 mV) (1 Pa = 94 dB SPL) |
| Impedance | Rated at 150 ohms (100 ohms actual ±20%) Recommended minimum load impedance: 800 ohms |
| Output Clipping Level | 1000 Ohm Load at 1,000 Hz: –6 dBV (0.5 V) |
| Maximum SPL (at 1,000 Hz) | 140.5 dB (0.25% THD, 1000 ohm load) |
| Self-Noise | 24 dB typical, A-weighted 26 dB typical, weighted per DIN 45 405 |
| Dynamic Range (1000 ohms) | 116.5 dB (maximum SPL to A-weighted noise level) |
| Signal-to-Noise Ratio | 70 dB at 94 dB SPL (IEC 651) S/N ratio is difference between 94 dB SPL and equivalent SPL of self– noise A-weighted |
| Polarity | Positive pressure on diaphragm produces positive voltage on pin 2 relative to pin 3 |
| Power Requirements | 11 to 52 vdc, 1.2 mA |
| Case | Aluminum construction with steel grille and satin black finish |
| Connector | Three-pin professional audio connector (male XLR type) |
| Net Weight | 200 grams (7 oz) |
| Dimensions | 192 mm (7-9/16 in.) L x 50 mm (2 in.) W at the widest point |






