| Cartridge Type | Electret Condenser |
| Frequency Response | 20 to 20,000 Hz |
| Output Impedance | 150 ohms (actual) |
| Power Requirements | 48 Vdc phantom, 4.7 mA |
| Common Mode Rejection | >50 dB, 50 Hz to 20 kHz |
| Polarity | Positive pressure on front diaphragm produces positive voltage on output pin 2 relative to pin 3 |
| Polar Patterns | Cardioid, Omnidirectional |
| Sensitivity (typical; at 1000 Hz; 1 Pa = 94 dB SPL) | -37 dBV/Pa |
| Self-noise (typical, equivalent SPL; A-weighted, IEC 651) | 14 dB |
| Maximum SPL @ 1000 Hz 5000 ohms load 2500 ohms load 1000 ohms load | 134 dB (159 dB, -25 Pad) 139 dB (164 dB, -25 Pad) 134 dB (159 dB, -25 Pad) |
| Output Clipping Level 5000 ohms load 2500 ohms load 1000 ohms load | 15 dBV 9 dBV 3 dBV |
| Dynamic Range 5000 ohms load 2500 ohms load 1000 ohms load | 131 dB 125 dB 120 dB |
| Signal to Noise ratio | 80 dB |
| Weight | Net: 156 g (5.5 oz.) |
| Switch | Attenuator: 0, −15, −25 dB Low Frequency Response: flat; -6 dB/octave below 115 Hz; -18 dB/octave below 80 Hz |




