Specifications
Cartridge Type
Electret Condenser
Polar Pattern
CVB/O Omnidirectional
CVB/C Cardioid
Frequency Response
70–16000 Hz
Output Impedance
180 Ω
Sensitivity
open circuit voltage, @ 1 kHz, typical
CVB/O –28 dBV/Pa[1] (40 mV)
CVB/C –32.5 dBV/Pa[1] (23 mV)
Maximum SPL[2]
1 kHz at 1% THD
CVB/O 117 dB SPL
CVB/C 120 dB SPL
Signal-to-Noise Ratio[3]
Ref. 94 dB SPL at 1 kHz
CVB/O 74 dB
CVB/C 67 dB
Dynamic Range
CVB/O 97 dB
CVB/C 93 dB
Self Noise
equivalent SPL, A-weighted, typical
CVB/O 20 dB SPL
CVB/C 27 dB SPL
Preamplifier Output Clipping Level
@ 1 kHz, at 1% THD
CVB/O -6 dBV
CVB/C -7 dBV
Common Mode Rejection
10 Hz to 100 kHz
>45 dB
Polarity
Positive pressure on diaphragm produces
positive voltage on pin 2 with
respect to pin 3
Environmental Conditions
Operating
Temperature
–18 to 57°C (0
to 135°F)
Storage
Temperature
–29 to 74°C
(–20 to 165°F)
Relative
Humidity
0 to 95%
Power Requirements
11–52 V DC[4], 2.0 mA
Weight
8 oz. (227 g)
[1] 1 Pa=94 dB SPL [2] THD of microphone preamplifierwhen applied input signal level
is equivalent to cartridge output at
specified SPL
[3] S/N ratio is the difference between94 dB SPL and equivalent
SPL of self noise, A-weighted
[4] All specifications measured witha 48 Vdc phantom power supply.
The microphone operates at lower
voltages, but with slightly decreased
headroom and sensitivity.

