KV 2 Audio Compex Specification
- Depth : 201 mm
- Depth : 7.91 in
- Height : 44.50 mm
- Height : 1.75 in
- Width : 483 mm
- Width : 19.02 in
- AC Voltage : 230 Volts
- Product Weight : 2.70 kg
- Product Weight : 5.95 lbs
- Certifications : CE
- Minimum Frequency Response (Bandwidth) : 20 Hz
- Minimum Frequency Response (Bandwidth) : 0.02 kHz
- Maximum Frequency Response (Bandwidth) : 100000 Hz
- Maximum Frequency Response (Bandwidth) : 100 kHz
- Dynamic Range : 130 dB
- Signal to Noise Ratio : 110 dB
- Number of Inputs : 2
- Number of Outputs : 2
- Total Harmonic Distortion + Noise (THD+N) : 0 %
- Rack Units (Height) : 1
- Number of Audio Channels : 2
- Rackmountable : Yes
- Input Impedance : 20000 ohm
- Output Impedance : 50 ohm
- AC Voltage (Minimum) : 180 Volts
- AC Voltage (Maximum) : 260 Volts
- Net Weight : 2.70 kg
- Net Weight : 5.95 lbs
KV2 Audio Compex
System Acoustic Perfomance
| -3dB Response | 20Hz ÷ 100kHz |
| Dynamic Range | >130dB |
| Channel Crosstalk | 90dB |
| Signal to Noise Ratio | 110dB |
| Total Harmonic Distortion | 0,001% |
Signal Input
| Input Channels | 2 |
| Input Impedance | 20kΩ (balanced) |
| Line input | XLR |
Signal Output
| Output Channels | 2 |
| Output Impedance | 50Ω |
| Line Output | XLR |
Features
| Level Control | -10 / +10dB |
| System setup | Bypass (remote controlled) |
| Harmonics | Drive, 0 ÷ 10 |
| Equalization | Level dependent |
| Indicators | 2x 2 Level LED bar graphs |
Compressor
| Threshold | ∞ ÷ -20dB |
| Ratio | 1:3 |
| Indicactors | 1x LED bar graphs |
Harmonics
| Range | 0 ÷ 10 |
Power
| Power Connector | IEC 320 |
| Operating Voltage | 115V / 230V |
| Operating Voltage Range | 90÷130V@60Hz | 180÷260V@50Hz |
Physical Dimensions
| Height | 44.5mm (1.75″) |
| Width | 483mm (19.0″) |
| Depth | 201mm (7.9″) |
| Weight | 2,7kg (5.96lbs) |





