DQ-C01

Email your friend
Control Input COM and terminals 1 – 8: Open voltage: 5 V DC, short circuit current: 25 mA,
removable terminal block (9 pins)
Control Memory selection: Direct: Max. 8 memories, Binary: 16 memories
(Any one of 16 memories can be assigned to each
terminal when set for Direct” mode.)”
Control method: No-voltage make of over 500 ms/
No-voltage make pulse of over 500 ms
(No-voltage make of over 500 ms only when set for
Binary” mode.)”
Volume control (Up/Down): Direct: Max. 4 groups, Binary: Max. 10 groups
(Any output channel or channel group can be
assigned to each terminal.)
Control method: 1-step variation with no-
voltage make pulse of over 500 ms. Continuous
variation in 500 ms units with pulse of
over 700 ms.
Continuous up/down variation in 500 msec units
with the addition of no-voltage make pulse of
over 700 msec.
Continuous volume variation stops when a break
pulse is fed.
Variable range: 0 to -∞ dB
Muting (On/Off): Max. 8 groups
(Any output channel or channel group can be assigned to
each terminal.)
Control method: No-voltage make of over 500 ms/
No-voltage make pulse of over 500 ms
The above controls can be performed singly or in combination with other
controls.
Setting PC software (Windows95/98/NT compatible)*
Finish Pre-coated steel plate, black, 30% glossy
Dimensions 26.5 (W) × 76.5 (H) × 101 (D) mm
Weight 60 g
Accessory Mounting screw …2, Removable terminal plug (9 pins) …1

* Windows95/98/NT is a registered trademark of Microsoft Corporation in the U.S.A.