Showing 1–12 of 64 results
520 DX
SHURE 520DX SPECIFICATIONS Type Dynamic Frequency Response 100 to 5,000 Hz Polar Pattern Omnidirectional Impedance High, unbalanced Load Impedance Range Minimum: 100 kΩ Output Level (at 1,000 Hz) Open Circuit Voltage –38.0 dBV/Pa (13 mV)1 Pa = 94 dB SPL Polarity Positive sound pressure on diaphragm pro-duces positive voltage
545 SD
SHURE 545 SD Specification Type Dynamic Frequency Response 50 to 15,000 Hz Polar Pattern Cardioid (unidirectional)–uniform with frequency, symmetrical about axis lmpedance Dual. Microphone rating impedance is 150 ohms (250 ohms actual) for connection to microphone inputs rated at 19 to 300 ohms and “High” for connection to high-impedance microphone
5575 SD
Type Dynamic (moving coil) Frequency Response (A-weighted) 50–16,000 Hz Polar Pattern Cardioid Output Impedance @ 1 kHz 270 Ω Sensitivity @ 1 kHz, open circuit voltage -56.0 dBV/Pa (1 Pa=94 dB SPL) Polarity Positive pressure on diaphragm produces positive voltage on pin 2 with respect to pin 3 Net
BETA 52 A
Specifications Cartridge Type Dynamic (moving coil) Frequency Response 20 to 10,000 Hz Polar Pattern Supercardioid Output Impedance 150 Ω Sensitivity (at 1kHz, open circuit voltage) −64 dBV/Pa (0.6 mV) 1 Pascal=94 dB SPL Maximum SPL (1 kHz at 1% THD, 1kΩ load) 174 dB Polarity Positive pressure on diaphragm
BETA 54
BETA 54 Specification Cartridge Type Condenser (electret bias) Frequency Response 20 to 20,000 Hz Polar Pattern Supercardioid Self-Noise 43.1 dB SPL(A-Weighted) Signal-to-Noise Ratio 55 dB at 94 dB SPL Recommended Minimum Input Impedance >1 kΩ Preamp Output Impedance 136 Ω Sensitivityopen circuit, ref. 1v/Pa at 1 kHz -56.0 dBV/Pa
BETA 56 A
Cartridge Type Dynamic (moving coil) Frequency Response 50 to 16,000 Hz Polar Pattern Supercardioid Output Impedance 150 Ω Sensitivity −51 dBV/Pa (2.8 mV) (at 1kHz, open circuit voltage) 1 Pascal=94 dB SPL Polarity Positive pressure on diaphragm produces positive voltage on pin 2 with respect to pin 3 Weight