Q-2008SPD

Email your friend

* 0 dB = 0.775 V

Power Source 100 – 240 V AC, 50/60 Hz
Power Consumption 78 W
Frequency Response 20 Hz – 20 kHz, ±1 dB (+4 dB* input)
Sampling Frequency 48 kHz
Input and Output Input: Max. 32 channels, modular construction (modules optional)
Output: Max. 32 channels, modular construction (modules optional)
Monitor bus: 1 stereo input, 1 stereo output
Connector: RJ45 connector
Connection cable: Shielded Category 5 or higher twisted pair
LAN cable(CAT5-STP)
Maximum cable distance: 100 m (between Q-2008SPD and D-2012C)
Headphone: 1 stereo

Signal Processing

Feedback Suppression Function 12 filters (auto + dynamic), maximum 4 bus channels
Auto-Mixing Function Ducker (automatic muting), NOM attenuation
Auto-Mixing Group 4 groups
Equalizer/Filter Parametric equalizer: 20 Hz – 20 kHz, ±15 dB, Q: 0.267-69.249
Filtering: High-pass filter 20 Hz – 20 kHz, 6 dB/oct, 12 dB/oct
Low-pass filter 20 Hz – 20 kHz, 6 dB/oct, 12 dB/oct
Notch filter 20 Hz – 20 kHz, Q: 8.651 – 69.249
All-pass filter 20 Hz – 20 kHz, Q: 0.267 – 69.249
High shelving filter 6 – 20 kHz, ±15 dB
Low shelving filter 20 – 500 Hz, ±15 dB
Horn equalizer 20 kHz, 0 to +18 dB (0.5 dB steps)
Crossover filter: 20 Hz – 20 kHz,
6 dB/oct, 12 dB/oct, 18 dB/oct, 24 dB/oct
Compressor/Auto-Leveler (Compressor mode)
Threshold: -20 to +20 dB (1 dB steps)
Ratio: 1:1, 1.1:1, 1.2:1, 1.3:1, 1.5:1, 1.7:1, 2:1, 2.3:1, 2.6:1, 3:1, 4:1,
5:1, 7:1, 8:1, 10:1, 12:1, 20:1, :1
Attack time: 0.2 ms – 5 s, Release time: 10 ms – 5 s
Gain: – infinity to +10 dB
Knee type: hard knee, soft knee 1, soft knee 2
(Auto-leveler mode)
Target level: -20 to +10 dB (1 dB steps)
Maximum gain: 0 to +20 dB (1 dB steps)
Attack time: 10 ms – 10 s, Release time: 100 ms – 10 s
Output Delay Delay time: 0 – 1360 ms (0.021 ms steps)
BUS Delay Delay time: 0 – 677 ms (0.021 ms steps)
Matrix Input: Max. 34 ( 32 + 2 ) channels × 24 buses,
Output: Max. 44 (24 + 4 + 16) buses × 32 channels
Dante Matrix Input: Max. 16 channels × 24 buses,
Output: Max. 28 (24 + 4) buses × 16 channels
Crosspoint Gain – infinity to 0 dB (1 dB steps)

 

Preset Memory 32
Auxiliary Function Key Locking function
LAN Network I/F: 10BASE-T/100BASE-TX (Automatic-Negotiation)
Connected via a switching hub
Network protocol: TCP/IP
Connection cable: Shielded Category 5 or higher twisted pair LAN cable(CAT5-STP)
Maximum cable distance: 100m(between D-2008SP and switching hub)
Control RS-232C: D-sub connector (9 pins) Used for external control
Module: Remote control module slot: 2
Dante 1000BASE-T, PRIMARY/SECONDARY 2 system, RJ45 connector, Enables decentralized installation, Audio transmission only
Connection cable: Shielded twisted pair (STP) Cat 5e or higher LAN cable
Max extend distance: 100 m (328.1 ft)(connected via a switching hub)
Input/Output: 16 channles, 24 bit
Sampling Frequency: 48 kHz
Operating Temperature +5 ℃ to +40 ℃ (41 ゜F to 104 ゜F)
Finish Panel: Aluminum, hair-line finish, black Case: Surface-treated steel plate
Dimensions 482 (W) × 132.6 (H) × 343.4 (D) mm (18.98″ × 5.22″ × 13.52″)
Weight 6.3 kg (13.89 lb)
Accessory Power cord (2 m (6.5 ft)) …1, Rack mounting screw …4, CD (Set-up software) …1, Module mounting screw (spare) …4, Blank panel (preinstalled on the module slot) …8
Option Mic/line input module: D-2000AD1, D-921E, D-921F, D-922E, D-922F
Stereo select input module: D-936R
Digital input module: D-923AE
Line output module: D-971E, D-971M, D-971R, D-2000DA1
Digital output module: D-972AE
CobraNet interface module: D-2000CB
Remote control module: D-981, D-983
VCA control module: D-984VC

Note: Dante is a trademark of Audinate Pty Ltd.