PSM 200

Email your friend

PSM 200 System technical specifications

  • Wired Bodypack Option: Yes

Further Technical Specs


PSM 200 System

  • RF Carrier Frequency Range: 518¬-865 MHz (country dependent)
  • Modulation: FM +/- 35 kHz Deviation (Nominal)
  • Operating Temperature: -7 degrees C to +49 degrees C (+20 degrees F to +120 degrees F)


P2T TransMixer

  • Modulation Limiter: Internal peak limiter (>10:1 hard knee compression)
  • Antenna: 1/4 Wavelength, semi-rigid, PCB Mount
  • Connector Type: XLR/1/4-inch combo
  • Nominal Input Level: -25 dBu @ 1/2 volume (12 o’clock)
  • Maximum Input Level: -5 dBu @ 1/2 volume (12 o’clock)
  • Current: 170 mA maximum
  • Dimensions: 220 mm x 140 mm x 40 mm (8.6 in. x 5.6 in. x 1.7 in.)
  • Net Weight: 370 g (13 oz.)

    Audio Input

  • Connector Type: XLR/1/4-inch combo
  • Configuration: electronically balanced
  • Actual Impedance: 1 kΩ
  • Nominal Input Level: -25 dBu @ 1/2 volume (12 o’clock)
  • Maximum Input Level: -5 dBu @ 1/2 volume (12 o’clock)
  • Pin Assignments:
    XLR: 2=hot; 3=cold, 1=ground
    1/4: Tip=hot, Ring=cold, Sleeve=ground
  • Phantom Power Protection? Yes:Up to 52 Vdc

    Audio Output

  • Connector Type: XLR
  • Configuration: electronically balanced
  • Pin Assignments: 2 = hot ; 3 = cold, 1 = ground
  • Phantom Power Protection? Yes: Up to 52 Vdc


P2R Bodypack Receiver

  • RF Sensitivity: 109 dBm typical
  • Squelch Threshold: 102 dBm typical
  • Antenna: Attached Whip
  • Audio Input Connector: Connector Type: 1/4-inch Mono
  • Impedance: 1 MΩ
  • Maximum Input Level: LO = +0 dBu; HI = 10 dBu
  • Frequency Response: 30 Hz to 20 kHz (+/ 3 dB); earphone dependent
  • Power Requirements: 9 V alkaline battery, Duracell® type MN1604 recommended
  • Battery Life (Volume Dependent): 6 hrs (Wired) ; 4 hrs (Wireless)
  • Audio Output Connector: 1/8 inch (3.5 mm)
  • Minimum Load ImpedanceGo to the glossary: 8 Ω
  • Net Weight: 100 g (3.52 oz.), less battery
  • Overall Dimensions: 122 mm x 73 mm x 32 mm (4.809 in. x 2.875 in. x 1.251 in.)


SE112 Sound Isolating™ Earphones

  • Dynamic MicroDriver for great sound with deep bass and impressive sound isolation.
  • Fixed cables.