KSM 141-SL

Email your friend
Category:

 

Cartridge Type Electret Condenser
Frequency Response 20 to 20,000 Hz
Output Impedance 150 ohms (actual)
Power Requirements 48 Vdc phantom, 4.7 mA
Common Mode Rejection >50 dB, 50 Hz to 20 kHz
Polarity Positive pressure on front diaphragm produces positive voltage on output pin 2 relative to pin 3
Polar Patterns Cardioid, Omnidirectional
Sensitivity (typical; at 1000 Hz; 1 Pa = 94 dB SPL) -37 dBV/Pa
 Self-noise (typical, equivalent SPL; A-weighted, IEC 651) 14 dB
Maximum SPL @ 1000 Hz 5000 ohms load 2500 ohms load 1000 ohms load 134 dB (159 dB, -25 Pad) 139 dB (164 dB, -25 Pad) 134 dB (159 dB, -25 Pad)
Output Clipping Level 5000 ohms load 2500 ohms load 1000 ohms load 15 dBV 9 dBV 3 dBV
Dynamic Range 5000 ohms load 2500 ohms load 1000 ohms load 131 dB 125 dB 120 dB
Signal to Noise ratio 80 dB
Weight Net: 156 g (5.5 oz.)
Switch Attenuator: 0, −15, −25 dB Low Frequency Response: flat; -6 dB/octave below 115 Hz; -18 dB/octave below 80 Hz