DP-SP3 CE

Email your friend

* 0 dB = 0.775 V

Power Source 220-240 V AC, 50/60 Hz
Power Consumption 25 W
Frequency Response 20 Hz – 20 kHz, ±1 dB
Sampling Frequency 96 kHz
Dynamic Range 110 dB or more
Distortion 0.03 % or less, 1 kHz, +4 dB* input/output, 20 Hz – 20 kHz BPF
Crosstalk -80 dB or less, 1 kHz
Input 2 channels, +4 dB* (max. +24 dB*), 10 kΩ, electronically-balanced,
removable terminal block (3P)
Output 6 channels, +4 dB* (max. +24 dB*), applicable load 600 Ω or more,
electronically-balanced, removable terminal block (3P)
AD Converter 24 bits
DA Converter 24 bits
Preset Memory 16

Signal Processing Section

Equalizer/Filter Parametric equalizer: 20 Hz – 20 kHz, ±15 dB, Q: 0.267 – 69.249
Filter:
High-pass filter: 20 Hz – 20 kHz, 6 dB/oct, 12 dB/oct
Low-pass filter: 20 Hz – 20 kHz, 6 dB/oct, 12 dB/oct
Notch filter: 20 Hz – 20 kHz, Q: 8.651 – 69.249
All-pass filter: 20 Hz – 20 kHz, Q: 0.267 – 69.249
High-shelving filter: 5 – 20 kHz, ±15 dB
Low-shelving filter: 20 – 500 Hz, ±15 dB
Horn equalizer: 20 kHz, 0 – 18 dB in 0.5 dB steps
Crossover 2 ways, 3 ways, 4 ways
Crossover filter: 20 Hz – 20 kHz, 6 dB/oct, 12 dB/oct, 18 dB/oct, 24 dB/oct,
-15 to +12 dB, polarity switchable
Delay: 0 – 170.656 ms in 0.01 ms steps
Compressor Threshold: -20 to +20 dB* in 1 dB steps
Ratio: 1:1, 1.1:1, 1.2:1, 1.3:1, 1.5:1, 1.7:1, 2:1, 2.3:1, 2.6:1, 3:1, 4:1, 7:1, 8:1, 10:1, 12:1, 20:1, infinity:1
Attack time: 0.2 ms – 5 s
Release time: 10 ms – 5 s
Delay Delay time: 0 – 682.656 ms in 0.01 ms steps
Matrix 2 × 6
Crosspoint Gain minus infinity to 0 dB in 1 dB steps

 

Function Input PAD (-14 dB) control, analog output attenuator
(- to 0 dB in 1 dB steps) control, EQ characteristic library for TOA speakers,
input/output level indicator (4-point LED indicator), output MUTE switch ×6

Control

Contact input 4 channels, open voltage: 5 V DC, short-circuit current: 5 mA,
removable terminal block (5 P),
control function: preset memory selection, volume control, and mute
Network Network I/F: 1 channel of 10BASE-T/100BASE-TX (auto-negotiation)
RJ45 connector, connection via switching hub
Network protocol: TCP/IP
Connection cable: Shielded Cat. 5 or higher twisted pair cable for LAN
(Cat. 5-STP or better)
Maximum cable length: 100 m (109.36 yd) (between DP-SP3 and switching hub)

 

Operating Temperature 0 ℃ to +40 ℃ (32 ゜F to 104 ゜F)
Operating Humidity 90 %RH (no condensation)
Finish Panel: Aluminum, hairline, black, Case: Surface-treated steel plate
Dimensions 482 (W) × 44 (H) × 289 (D) mm (18.98″ × 1.73″ × 11.38″)
Weight 3.1 kg (6.83 lb)
Accessories Power supply cord ((2 m (6.56 ft)) ×1, removable terminal plug (3P) ×8,
removable terminal plug (5P) ×1, rack mounting screw ×4,
CD-ROM (containing setup software) ×1